Page 86 of 229

Posted: Fri Jun 12, 2009 4:18 pm
by less_cunning
Haze wrote:thats my plan actually, im done with the pedal stuffs for now, i think i might snag a friend's 80s crate he has, 50w, and he let me turn it all the way up and MAN tubes sound great when pushed to 10
you don't need a tube amp until you start gigging. or at least recording...

Posted: Fri Jun 12, 2009 8:50 pm
by fittedoar
For $30 I picked up an ART Tube Preamp, it may not be a tube amp, but it gives me a warmer sound and a bit of tubey creamy goodness. Look at my pedalboard post, it's under my DOD chorus. I like it and for $30 you can't go wrong even if it doesn't suit ur needs.

Posted: Fri Jun 12, 2009 8:59 pm
by stewart
fittedoar wrote:Recently updated my pedalboard, and figured I'd finally post my first pedalboard pic on shortscale. Don't rag on me too hard.

Image
noise suppressor eh? i had one of those on my board until recently, it was a tone vampire. i'd rather have the odd bit of feedback than lose all my top end. do you find it useful?

Posted: Fri Jun 12, 2009 9:07 pm
by endsjustifymeans
Mike wrote:You really need to stop buying pedals and get a tube amp Haze.
Solution...
MBM Tube Amps.

Posted: Fri Jun 12, 2009 9:27 pm
by Noirie.
endsjustifymeans wrote:
Mike wrote:You really need to stop buying pedals and get a tube amp Haze.
Solution...
MBM Tube Amps.
DO WANT FUCKING WANT!

They could be set out like boxes of Mike or saltbooster +.

Posted: Fri Jun 12, 2009 9:28 pm
by Mike
hah you guys are sweet but we're a waaaays off that yet.

Posted: Fri Jun 12, 2009 9:58 pm
by endsjustifymeans
Mike wrote:hah you guys are sweet but we're a waaaays off that yet.
The Salt Pillar!

DEW EET!

Posted: Fri Jun 12, 2009 11:10 pm
by fittedoar
[/quote]

noise suppressor eh? i had one of those on my board until recently, it was a tone vampire. i'd rather have the odd bit of feedback than lose all my top end. do you find it useful?[/quote]

I realized the tone loss not too long after turning it on. I realized that the higher you have the threshhold, the more tone lost. I just turn the decay knob down all the way, and that way i don't have to turn the threshhold up as high. I found a good medium between tone loss and hiss loss. I like it, plus i'm going to get the parallel DC cord so i can power pedals off of it.

Posted: Sun Jun 14, 2009 5:38 pm
by Mike
Image
Image
Image

Posted: Sun Jun 14, 2009 6:12 pm
by Thom
S-weet, looks great Mike, I love the new salt-shaker and the clone, they look really pro.

Posted: Sun Jun 14, 2009 6:17 pm
by Mike
Cheers.

I'm drilling the case for the Crunch Box which will replace the MXR this Wednesday, and also my Blackstone MOSFET Overdrive which has the trimpots externalised to give it controls for Pre-Gain, Post-Gain, Tone, Presence and Volume aswell as the Buffer/Reactive toggle.

Posted: Sun Jun 14, 2009 6:20 pm
by Noirie.
They all do look fanastic Mike. How you setting out the crunch box?

Posted: Sun Jun 14, 2009 6:32 pm
by Mike
Exactly like Lamp's, Knobs in a Triangle, in/out jacks on the sides near the top of the case. I'm building one like that for Markleton so I'm just doing one for myself alongside it.

Not sure about colour yet, might go with the black metallic.

Posted: Sun Jun 14, 2009 6:37 pm
by Thom
Mike wrote:Not sure about colour yet, might go with the black metallic.
Do it.

Posted: Sun Jun 14, 2009 6:39 pm
by Thom
Mike wrote:Blackstone MOSFET Overdrive which has the trimpots externalised to give it controls for Pre-Gain, Post-Gain, Tone, Presence and Volume aswell as the Buffer/Reactive toggle.
Also, this sounds really interesting - look forward to the demo.

Posted: Sun Jun 14, 2009 8:10 pm
by Aeon
Mike, what is that Marshall JCM800/Plexi pedal? A homebrew? Based on a pre-existing circuit? Looks velly cool, as do the rest of your pedals.

Posted: Sun Jun 14, 2009 8:18 pm
by Gavin
[youtube][/youtube]

Posted: Mon Jun 15, 2009 7:27 am
by Mike
Aeon wrote:Mike, what is that Marshall JCM800/Plexi pedal? A homebrew? Based on a pre-existing circuit? Looks velly cool, as do the rest of your pedals.
It's a Catalinbread Dirty Little Secret. At $159 the original is a superb deal and a brilliant pedal, go buy one!

Posted: Mon Jun 15, 2009 7:54 am
by Progrockabuse
Mike wrote:
Aeon wrote:Mike, what is that Marshall JCM800/Plexi pedal? A homebrew? Based on a pre-existing circuit? Looks velly cool, as do the rest of your pedals.
It's a Catalinbread Dirty Little Secret. At $159 the original is a superb deal and a brilliant pedal, go buy one!
+1, also for the UK people. catalinbread ship direct from there website at only $10 for international shipping. so the DLS would be £103 pounds.

Posted: Mon Jun 15, 2009 12:25 pm
by Thom
Progrockabuse wrote:
Mike wrote:
Aeon wrote:Mike, what is that Marshall JCM800/Plexi pedal? A homebrew? Based on a pre-existing circuit? Looks velly cool, as do the rest of your pedals.
It's a Catalinbread Dirty Little Secret. At $159 the original is a superb deal and a brilliant pedal, go buy one!
+1, also for the UK people. catalinbread ship direct from there website at only $10 for international shipping. so the DLS would be £103 pounds.
I ordered one last week following my OD thread and yours and Mike's recommendations. They were really quick to answer my emails and dead friendly. Hopefully it won't take too long.