Page 1 of 1
Replacement Nut for MIJ Jazzmaster
Posted: Wed Oct 29, 2025 5:02 pm
by 71Smallbox
I need to replace the nut on my 93' Japanese Jazzmaster. Would a pre-cut one for a strat work as long as its the 7.25 radius? Should the bottom be flat or curved? I really have no clue and google searches keep churning up AI garbage suggestions. Thanks in advance!
Re: Replacement Nut for MIJ Jazzmaster
Posted: Fri Oct 31, 2025 1:21 pm
by sunshiner
I have no idea but you could try this one from GraphTech. If the nut slot is radiused, you just file down that thingy at the bottom
http://www.ebay.com/itm/394237385190?_ ... earch=true
Re: Replacement Nut for MIJ Jazzmaster
Posted: Sat Nov 01, 2025 4:33 pm
by paul_
The bottom should indeed be curved, as the channel in the fingerboard still has a radius of 7.25”.
At least that’s the way it’s been on all the Fender and AllParts Fender-licensed necks I’ve put a new nut in. Just be thankful it’s not a Jaguar, those can be annoying to replace. Just check the width dimensions and string spacing if it’s pre-slotted.