Pickups, pedals, amps, cabs, combos
Moderated By: mods
greenweenie
.
Posts: 85 Joined: Fri Oct 23, 2009 12:00 pm
Post
by greenweenie » Fri Oct 23, 2009 12:46 pm
Hi guys. I just registered here. Here's my board:
No MBM yet but soon there will be.
benecol
Post
by benecol » Fri Oct 23, 2009 12:53 pm
Ooh, neat board - what's that two switch thingy next to the wah? Welcome aboard, too. Also:
Mike wrote: Pierre in France
If you're going to invent these testimonials, at least try and make the names a
little bit more imaginative, eh?
Mike
I like EL34s
Posts: 39190 Joined: Thu Apr 20, 2006 8:30 am
Location: Edinburgh, Scotland
Contact:
Post
by Mike » Fri Oct 23, 2009 12:59 pm
benecol wrote: Ooh, neat board - what's that two switch thingy next to the wah? Welcome aboard, too. Also:
Mike wrote: Pierre in France
If you're going to invent these testimonials, at least try and make the names a
little bit more imaginative, eh?
Oh HAR.
I'll echo that, lovely board, Electric Mistresses are fantastic. What's the DIY pedal?
Progrockabuse
.
Posts: 4986 Joined: Mon Jan 14, 2008 11:54 am
Location: Derbyshire
Post
by Progrockabuse » Fri Oct 23, 2009 1:37 pm
welcome to the boards, greenweenie. nice board
+1 whats the DIY pedal.
Guitars: Fender Classic Player CS 60’s Stratocaster, Epiphone “Yungblud” SG Jr
Pedals: TC Electronic SCF>JHS Fumble>Ceriatone Centura>MXR Carbon Copy
Amps:
Marshall DSL20CR>MX112R 1x12
Marshall Origin 20H>2x10 V30/Greenback
Marshall MG10 Combo
PROGFEST
sp3k
.
Posts: 1282 Joined: Sat Sep 20, 2008 4:02 pm
Location: Portugal
Post
by sp3k » Fri Oct 23, 2009 4:16 pm
it goes: boss ps3 (with m-audio exp. pedal), moded rat, behringer super fuzz, danelectro gay cat fuzz, danelectro fag tone, ehx lpb1, ehx nano small stone, ehx memory boy, ehx mmwh, ehax cathedral.
i'll try and demo the cathedral. Got it and the memory boy yesterday, the boy is crazy fun.
i'm also waiting for my plane ticket plus to arrive
greenweenie
.
Posts: 85 Joined: Fri Oct 23, 2009 12:00 pm
Post
by greenweenie » Fri Oct 23, 2009 10:23 pm
benecol wrote: Ooh, neat board - what's that two switch thingy next to the wah? Welcome aboard, too.
Mike wrote: Oh HAR.
I'll echo that, lovely board, Electric Mistresses are fantastic. What's the DIY pedal?
Progrockabuse wrote: welcome to the boards, greenweenie. nice board
+1 whats the DIY pedal.
Thanks guys. It's a BSIABII with boost. The little switch controls the order of the two effects.
Progrockabuse
.
Posts: 4986 Joined: Mon Jan 14, 2008 11:54 am
Location: Derbyshire
Post
by Progrockabuse » Mon Oct 26, 2009 12:32 am
starting to wish i had a little bit of modulation on my board again. mainly for texture.
gain sounds are fine, just something to add swirl on some stuff
Guitars: Fender Classic Player CS 60’s Stratocaster, Epiphone “Yungblud” SG Jr
Pedals: TC Electronic SCF>JHS Fumble>Ceriatone Centura>MXR Carbon Copy
Amps:
Marshall DSL20CR>MX112R 1x12
Marshall Origin 20H>2x10 V30/Greenback
Marshall MG10 Combo
PROGFEST
greenweenie
.
Posts: 85 Joined: Fri Oct 23, 2009 12:00 pm
Post
by greenweenie » Tue Oct 27, 2009 1:25 pm
I think black grille cloths on Fenders look bad.
But I love the Cyber Twin. Used to have one and I miss it!
Haze
.
Posts: 4924 Joined: Tue Jan 15, 2008 4:27 am
Location: Tulsa, OK
Contact:
Post
by Haze » Wed Oct 28, 2009 3:31 am
Left some open room:
we'll see what fills it up in the next couple of weeks!
Wilbur
.
Posts: 267 Joined: Sat Jun 21, 2008 4:25 am
Location: Diggnation, USA
Post
by Wilbur » Sat Oct 31, 2009 10:43 pm
Newly constructed board for my main bass rig (Hartke LH500, 2 2x15s)
Jazz with NJ4SV's > Alesis Nano comp > Geiger counter > BSW (glorified octave,all its used for) > BBM > DD-6 > TU-2.
Actual settings shown. Nano comp sounds great, but really used more like a limiter to tame over-zealous open C#-ing. DD-6 mostly for self-oscillation swoops, Tuner's at the end to kill whole board on hard stops. Soon to be a PT-1 with a DD-20 instead and a Barber LTD SR for grit. Maybe a VT Bass at the end of the chain/in the rack as well.
Mike
I like EL34s
Posts: 39190 Joined: Thu Apr 20, 2006 8:30 am
Location: Edinburgh, Scotland
Contact:
Post
by Mike » Sun Nov 01, 2009 8:44 pm
This is currently working great at home for low volume tonez
Progrockabuse
.
Posts: 4986 Joined: Mon Jan 14, 2008 11:54 am
Location: Derbyshire
Post
by Progrockabuse » Thu Nov 05, 2009 1:50 pm
just gone through my stuff. i've gone from having this lot
to this
and that's still way more than i need to have, as i only use maybe one or two at the most.
Guitars: Fender Classic Player CS 60’s Stratocaster, Epiphone “Yungblud” SG Jr
Pedals: TC Electronic SCF>JHS Fumble>Ceriatone Centura>MXR Carbon Copy
Amps:
Marshall DSL20CR>MX112R 1x12
Marshall Origin 20H>2x10 V30/Greenback
Marshall MG10 Combo
PROGFEST
sp3k
.
Posts: 1282 Joined: Sat Sep 20, 2008 4:02 pm
Location: Portugal
Post
by sp3k » Sun Nov 08, 2009 7:52 pm
it goes: boss ps3 (with m-audio exp. pedal), moded rat, behringer super fuzz, danelectro fuzz, danelectro fab tone, dwarfcraft plane ticket plus, ehx nano small stone, boss tr2, ehx memory boy, ehax cathedral, ehx mmwh.
the plane ticket is really great. The tr-2 is nice, got it really cheap, probably i'm trading it for a mbm tremolo when i have some money.
cobascis
.
Posts: 3831 Joined: Sat Jun 21, 2008 4:31 pm
Post
by cobascis » Wed Nov 11, 2009 11:29 pm
Mike wrote:
This is currently working great at home for low volume tonez
You still liking the Bugera? No problems? I think it's great.
Though, I have a wierd issue. Try turning the reverb all the way up and play aggressively at a pretty loud volume for a bit. I get this feedback tone that starts building up, and persists even when I turn BOTH guitar pickups off? How is this possible? The noise stops when the volume goes back down, which doesn't make sense if the pickup turning off didn't change anything. Also the head rattles on a G note consistently. What about yours?
Mike
I like EL34s
Posts: 39190 Joined: Thu Apr 20, 2006 8:30 am
Location: Edinburgh, Scotland
Contact:
Post
by Mike » Thu Nov 12, 2009 10:12 am
I have none of those problems I'm afraid.
If the head rattles on a G it is because your Cabinet is making it to so. Make sure it's sturdly on the cab and not resting on anything else.
ac88
.
Posts: 112 Joined: Fri Nov 06, 2009 6:14 pm
Post
by ac88 » Mon Nov 16, 2009 6:58 pm
timhulio
Redheaded Stepchild
Posts: 4699 Joined: Thu Apr 20, 2006 10:06 am
Location: London, UK
Contact:
Post
by timhulio » Tue Nov 17, 2009 10:43 pm
Here's my Sailplanes setup at the moment. It's quite a minimal sound with very little fuss.
Musima Elgita ---> Korg DT-10 tuner -> MXR Micro Amp clone with AMZ buffer -> Utility Perkolator -> Schaller Tremolo clone -> Behringer Verbzilla copy ---> Fender Musicmaster Bass amp.
Noirie.
YOUTH
Posts: 5364 Joined: Thu Jan 15, 2009 9:51 pm
Post
by Noirie. » Tue Nov 17, 2009 10:52 pm
Nice. Can't wait to my Hulio trem gets here.
Btw what are your settings for the reverb machine?
I've got one aswell and still haven't got my head around it tbh.
theshadowofseattle wrote: less being WOKE
more being STOKED